Well, they may be Pyle brand, but it’s still and upgrade!

While the original speakers in the soundbar are OK, I opted for a bit of an upgrade. I’ve used Pyles several times and find them to be pretty decent cheap speakers.

I also moved the soundbar (Rugged Ridge brand from Alpine Jeep) from the rear of the roll bar to in front of the roll bar for a little better sound position. It’s directly over your head now which is not ideal, but at least you can hear the sound.

I enlarged the holes so the Pyle 6 1/2″ would fit a little better and added Bass blocker caps to each. Update – removed the Bass blockers. Not necessarily needed. My wife likes the sound better without them.

I rewired the built-in courtesy lights. The original built-in light was wired so you could turn them off/on by swiveling the light right or left… Now it’s either on or off according to the stock courtesy lights.

I also moved the wiring connection to the opposite side. Since the soundbar was turned around, the connection was on the opposite side. That made the wiring run longer. I would either have had to lengthen the wires, or keep the connection on the same side. Easy decision. Drill a new hole and move the wiring. Plug the original hole.

New overhead position

Pyle PLG series. Sound good…

Original speakers installed

Enlarge the speaker opening as necessary if at all.

Pyle in place.